DW Spectrum User Manual

Key Concepts:

•This is a default event that can be disabled.

•Users can choose to hide this notification.

•Occurs when motion is detected by a device.

•A Recording Schedule must be enabled on the selected cameras for this rule to be functional.

•The current motion event is considered complete when no motion occurs for 3 seconds.

•Once stopped, a future motion is considered a new motion event.

Occurs At:

Select the cameras that be monitored for motion detection signals.

1.Click on the On data field to open the selection dialog.

2.Slide the Show all cameras switch to make additional, possibly incompatible cameras appear in red text.

3.If needed, use the search box is filter available cameras.

4.Selecting a server will automatically select all cameras attached to the server.

5.Adjust the list of selected cameras until the event rule is configured as intended.

Troubleshooting Suggestions:

•The user has disabled this type of notification.

•Recording is disabled for cameras being monitored.

•The motion mask is not set properly..

•Too many cameras are monitored, triggering too many events to process.

•Cameras that are monitored are offline.

•Event action is not configured properly to act on the motion detection signal.