DW Spectrum User Manual

Generates output on a device when an event occurs, starts, or stops.

IMPORTANT: Output must be supported on the selected devices.

Basic Parameters

•At – Device(s) on which output will be triggered. To specify devices see Selection Lists in Event Rules. At least one device must be selected.

Note: A warning notification will open if one or more of the selected devices does not have an output relay. These devices will be highlighted in red.

Advanced Parameters

•Output ID – The I/O Module port ID to route signal to (see "Setting Up I/O Modules").

May be caused by

•Any Event

•Motion on Camera, Generic Event, Analytics Event, Soft Trigger, and Input Signal on Device – synchronous output. Output stops when motion or input stops.

Why Action may work incorrectly

•Output is not supported on some devices.

•Event is not configured properly.